Samsung MultiXpress M537x series - Page 319

Machine
319
2. Advanced Features for Settings Menu
11
Timers (administrator only)
When there is no input for a certain period of time, the machine cancels the held
job or exits the current menu and goes in to the default settings. You can set the
amount of time the machine will wait before it cancels a held job or exits the
current menu.
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine. When SyncThru™ Web Service opens, click Settings >
Machine Settings > System > Setup.
• System Timeout: The machine returns to the Copy menu if there is no input
for the given time.
• Held Job Timeout: When an error occurs while printing and there is no
signal from the computer, the machine holds a job for a specific time period
before deleting it.
• Job Timeout: When there is no input for a certain period of time, the
machine cancels the current job. You can set the amount of time the
machine will wait before canceling the job.
12
ECO
Allows you to save print resources and enables ecofriendly printing.
• Default Mode : Select whether to turn the Eco mode on or off.
On-Forced: Sets the Eco mode on. If a user wants to turn the Eco mode off,
the user needs to enter the password.
• Eco Features Configuration : Setting the ECO fratures.
- Default Settings: The machine is set to Default Eco mode.
- Custom Settings: Change any necessary values.