Loading paper in the tray
54
2. Media and tray
7
After inserting paper into the tray, squeeze the paper width guides and
slide them to the desired paper size marked at the bottom of the tray.
• Do not push the paper guide too far causing the media to wrap.
• If you do not adjust the paper width guide, it may cause paper jams.
• Do not use a paper with a leading-edge curl, it may cause a paper jam or
the paper can be wrinkled.
• Do not overload the tray. Otherwise, it may cause paper jams. Make sure
that the paper is below the maximum paper capacity guide inside the
tray.
1 paper capacity
guide
1
To Next Page
Loading...
