Samsung MultiXpress M537x series - Printing on Special Media

58
2. Media and tray
Printing on special media
The table below shows the available special media for each tray.
The paper setting in the machine and driver should match to print without a
paper mismatch error.
To change the paper setting set in the machine, from SyncThru™ Web Service
click Settings tab > Machine Settings > System > Input Tray (see "Settings
tab" on page 170).
Or, you can set it from the control panel.
Then, set the paper type from the Printing preferences window > Paper tab >
Paper Type (see "Opening printing preferences" on page 70).
For example, if you want to print on labels, select Labels for Paper Type.
When using special media, we recommend you feed a piece of paper at a
time. Check the maximum input number of media for each tray (see "Print
media specifications" on page 284).
(●: Supported, Blank: Not supported)
The media types are shown in the Printing Preferences. This paper type
option allows you to set the type of paper to be loaded in the tray. This
setting appears in the list so that you can select it. This will let you get the
best quality printout. If not, the desired print quality may not be achieved.
Types
Standard tray/
Second Cassette
Feeder
a
High Capacity
Feeder
a
Multi-purpose tray
Plain ●● ●
Thick ●● ●
Thin ●● ●
Cotton ●● ●
Color ●● ●
Preprinted ●● ●
Recycled ●● ●
Envelope ●
(ISO B5, Monarch,
DL, C5, C6, No10
only)
●
(ISO B5, Monarch, DL,
C5, C6, No10 only)
Labels ●●
CardStock ●● ●
Bond ●● ●
Archive ●● ●
LetterHead ●● ●
Punched ●● ●
a. Optional device.
Types
Standard tray/
Second Cassette
Feeder
a
High Capacity
Feeder
a
Multi-purpose tray