Extended functions
48
Using shooting modes
6
Touch to save the photo.
•
If the camera fails to detect a face in the photo, you cannot use
Beauty Palette mode.
•
The camera is only able to detect one face at a time. If there is more
than one face in the photo, select a face to apply a beauty effect.
•
Depending on the subject’s facial structure, the camera may not
recognize the subject’s face.
•
When an image is rotated, the camera can recognize a subject’s face
only when the angle of the face is 90°, 180°, or 270° from normal
orientation.
•
To increase the face recognition rate, the subject’s face size should be
bigger than 1/12 of the screen.
To Next Page
Loading...
