Samsung MX-F630DB - Settings; Initial Settings Procedure

|
14 English
Settings
The Initial Settings Procedure
Press the POWER button when it is plugged in
TV for the first time. Initial Settings screen will be
displayed.
▲▼ (select the desired language)

v

▲▼ (select the desired TV Aspect)

v
.
>
Move
"
Select
Initial settings > On-Screen Language
Select a language for the on-screen displays
English
한국어
Nederlands
Français
Deutsch
Italiano
| NOTE |
\
The initial screen may appear different, depending on
the content of the disc.
\
If you move to the previous screen, press and hold the
RED(A) button.
\
Once you select a menu language, you can change it
by pressing the
5
button on the front panel for more
than 5 seconds with no disc.
\
If you want to display the Initial Setting screen again
and make changes, select the Reset option.
Accessing the Settings Screen
1. Press the POWER button.
Function DVD/CD
Settings
2. Press the ◄► buttons to select Settings,
then press the v button. The Settings screen
appears.
3. To access the menus, sub-menus, and options
on the Settings screen, please refer to the
remote control illustration below.
Buttons on the Remote Control Used
for the Settings Menu
1
HOME Button : Press to move to the Home
screen.
2
RETURN Button : Return to the previous menu.
3
v
(Enter) / DIRECTION Button :
• Press ▲▼◄► to move the cursor or select
an item.
• Press the
v
button to activate the currently
selected item or confirm a setting.
4
EXIT Button : Press to exit the current menu.
Display
TV Aspect
• 4:3 Pan-Scan: Select when you want to see the 16:9
video supplied by the DVD without the black bars on
top and bottom, even though you have a TV with a 4:3
ratio screen.
• 4:3 Letter Box: Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
• 16:9 Wide: You can view the full 16:9 picture on your
widescreen TV.
| NOTE |
\
If a DVD is in the 4:3 ratio, you cannot view it in the
wide screen.
\
Since DVD discs are recorded in various image
formats, they will look different depending on the
software, the type of TV, and the TV aspect ratio
setting.
Video Out Signal
Different countries apply different TV standard.
You can select from NTSC or PAL.
\
This product may not support the Video Out Signal
function depending on your region.
Settings
1
2
4
3
MX-F630DB-F730DB-ENG-0207.indd 14 2013-3-13 16:05:22