10 English English 11
Basic Functions
Selecting a Track
You can select a desired track while the disc is
being played
.
To play the previous track
Press the
[
button within 3 seconds after the current
track has started playing.
Press the
[
button twice at least 3 seconds after the
current track has started playing.
To play the next track
Press the
]
button.
To play the current track from the beginning
Press the
[
button 3 seconds after the current track
track has started playing.
To play the track of your choice
Press the
[
or
]
button to move to a desired track.
• You can also
use the
number ( 0~9 ) buttons on
the
remote control to select a track.
Searching for a Track/Folder Quickly
You can select a track/folder directly without
the
[
,
]
buttons.
CDDA/MP3-CD/WMA-CD
1. Turn the EASY SEARCHING JOG on the product
to the left or right to select a desired track.
• You can move to the selected track directly.
2. When searching is done, the track will automatically
start playing.
Searching for a Specific Music Passage on
a CD
When listening to a CD, you can quickly search
for a specific music passage on a track.
Forward Search ............................
)
Backward Search
.........................
(
You can also press and hold the
[
,
]
buttons on
the product to automatically scan for a track.
Repeat One or All Tracks on a CD
You can repeatedly play a track, a group of
tracks, or an entire CD.
1. Press the REPEAT button on the remote
control.
Each time you press the REPEAT button, the
r
epeat mode will change as follows:
MP3:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
CD:
OFF ➝ TRACK ➝ ALL ➝ RANDOM
2. When you want to stop the repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels repeat playback.
• TRACK: Repeatedly plays the selected track.
• DIR (DIRECTORY): Repeatedly plays all tracks
in the selected directory.
• ALL: Repeatedly plays the entire disc.
• RANDOM: Plays tracks in random order.
A-B Repeat Playback
You can repeatedly play back a designated
section of a CD.
1. Press the REPEAT A-B button at the beginning
of desired part.
• 'RPT A' will be displayed.
2. Press the REPEAT A-B button at the ending of
desired part.
• 'RPT AB' will be displayed.
3. To cancel REPEAT A-B function, press the
REPEAT A-B button again.
• 'OFF' will be displayed.
➣
The REPEAT A-B function is available within a
track.
CD Programming
This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
• However, you must stop playing the CD before
selecting tracks.
1. While in CD playback mode, press the STOP
(
@
) button to stop playing the CD.
2. Press the ENTER
( )
button to display the
message below:
(01= program number, ---= track number)
MX-FS9000-XU-ENG_130927.indd 10 2013-09-27 �� 1:40:02
To Next Page
Loading...
