Basics
24
6
Configure the IP settings.
•
When using DHCP, select
Obtain an IP address
automatically
.
•
When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select
Use the
following IP address
and set the IP address manually.
7
Select
OK
to save the settings.
5
Select
Internet Protocol Version 4 (TCP/IPv4)
from the
list below
This connection uses the following items
→
Properties
.
•
The Network Component name may differ depending on
the operating system.
•
To add a network item such as a client, service, or protocol,
select
Install...
under the list of network items.
To Next Page
Loading...
