Settings & Upgrade
57
3
Select
Advanced
→
Smart Battery Calibration
.
4
The Battery Calibration function is activated and the
battery is forcefully discharged. To stop the operation,
press the
Esc
key.
This operation requires 1-3 hours depending on the battery
capacity and the remaining battery charge.
Using the Battery Calibration function
When charging/discharging the battery repeatedly for a
short time only, the battery usage time may be reduced by
the difference between the actual battery charge and the
remaining charge display.
You can make the actual battery charge and the remaining
charge display the same by discharging the battery completely
using the Battery Calibration function, and then recharging it
again.
The screen images and terms may differ from the
actual product depending on the computer model and
driver version.
1
Turn off the computer and then disconnect the adapter.
2
Turn the computer back on and press the
F2
key before the
Samsung logo appears to enter the BIOS setup screen.
To Next Page
Loading...
