Samsung NX-N2 - Page 50

50
Using "PCoIP"
2
2 Using "PCoIP"
Ping Tab
The Ping page allows you to ping a device to see if it is reachable across the IP network.
This may help you determine if a host is reachable. As a result of firmware releases 3.2.0 and later forcing
the “do not fragment” flag in the ping command, you can use this feature to determine the maximum
MTU size.
Figure 2-18: Ping Configuration
 Ping Settings
 Destination
IP Address or FQDN to ping
 Interval
Interval between ping packets
 Packet Size
Size of the ping packet
 Packets
 Sent
Number of ping packets transmitted
 Received
Number of ping packets received