- 26 -
Button Description
Solar Cell
Expose to light when the remote is not in use. This will extend the remote's operating
time.
(Power)
Press to turn the Product on or off.
MIC / LED
Used as MIC when using voice recognition with the remote control.
The LED on the front will light when charging. When the battery is fully charged, the
LED will turn off.
" Do not impact the MIC hole or use a sharp object to poke into the hole.
" This function may not be supported depending on the model or geographical
area.
(Voice Assistant)
Runs Voice Assistant. Press and hold the button, say a command, and then release the
button to run Voice Assistant.
" The supported Voice Assistant's languages and features may differ by
geographical region.
" This function may not be supported depending on the model or geographical
area.
(Settings - Number - Colour
button)
Each time you press this button, Settings menu / virtual numeric pad / Option pad
with Colour buttons are displayed alternately.
● Use this button to access additional options that are specific to the
feature in use.
● Press to bring up the virtual numeric pad on the screen. Use the
numeric keypad to enter numeric values. Select numbers and then
select Done or Enter Number to enter a numeric value. Use to change
the channel, enter a PIN, ZIP code and etc.
" If the Colour Button appears with a number strip on the screen, select the
Colour Button and then select a specific colour by using the directional button
(up, down, left, right). Use this to access additional options that are specific to
the feature in use.
(Multi View)
Press the button to directly enter the Multi View function.
To Next Page
Loading...
