93
Screen Lamp Schedule
Screen Lamp Schedule
Enable or disable the lamp schedule.
Off / On
Schedule 1, Schedule 2
Time
The panel brightness will change to the brightness set in Lamp at a specified time.
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
0 ~ 100
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
Off / 15 min / 30 min / 60 min
Disabled when an attached PC is in power saving mode.
The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
Off / 4 hours / 6 hours / 8 hours
Eco Solution
Brightness Limit
Energy Saving Mode
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
On
Off
Off
Off
4 hours
– The displayed image may differ depending on the model.
To Next Page
Loading...
