6-3. Connector Functions
Connector Functions
CN102 DVI-I (Analog/ Digital) signal input terminal
* Upon occurrence of a fault: No RGB Output error may occur.
CN200 Connected to the function board.
* Upon occurrence of a fault: No LED screen and Function Failure error may occur.
CN400 Transfers LVDS signals from the main board to the panel.
* Upon occurrence of a fault: Blank Screen and No Power errors may occur.
CN601 Sends PWM outputs from the power board to the inverter (LED driver for XL2370).
* Upon occurrence of a fault: Blank Screen error may occur.
CN604 HDMI sound output terminal
* Upon occurrence of a fault: An error may occur in I2S digital sound outputs inputted to the
HDMI.
CN703 HDMI signal input terminal
* Upon occurrence of a fault: No Digital Output (No TMDS output) error may occur.
CN700 Supplies 14V (12V for P2070H) from the adapter to the main board.
* Upon occurrence of a fault: No Power and Blank Screen errors may occur.
6-4. Cables
Use LVDS 30p FFC cable
Code
BN96-08740S (P2070H) BN96-08740M (P2270H)
Photo
To Next Page
Loading...
