Media and tray
43
2. Menu Overview and Basic Setup
The paper setting in the machine and driver should match to print without
a paper mismatch error.
• You change the paper setting set in the machine from Samsung Easy
Printer Manager program or SyncThru™ Web Service.
- If you machine is connected to the local, you can set the machine’s
setting from Samsung Easy Printer Manager > Advanced Setting
> Device Settings (see "Using Samsung Easy Printer Manager" on
page 199).
- If your machine is connected to the network, you can set the
machine’s setting from SyncThru™ Web Service > Settings tab >
Machine Settings (see "Using SyncThru™ Web Service" on page 192).
•
You can set it using
(Menu) > Paper >
select the tray you want >
Paper
Size
or
Paper Type
on the control panel.
1
Select (Menu) > Paper > select the tray you want > Paper Size or
Paper Type on the control panel.
2
Select the option you want.
3
Press OK to save the selection.
4
Press (Stop/Clear) to return to ready mode.
If you want to use special-sized paper such as billing paper, select the Paper
tab > Size > Edit... and set Custom Paper Size Settings in the Printing
Preferences (see "Opening printing preferences" on page 45).
7
Using the output support
The surface of the output tray may become hot if you print a large number
of pages at once. Make sure that you do not touch the surface, and do not
allow children near it.
The machine sends output to the output tray by default. The printed pages stack
on the output support, and the output support will help the printed pages to
align. Open the output support.
To Next Page
Loading...
