Using the NFC feature (Optional)
160
2. Using a Network-Connected Machine
5
Tag your mobile device (usually located on the back of the mobile
device) over the NFC tag( ) on your printer.
Wait few seconds for the mobile device to connect to the printer.
• For some mobile devices, NFC tag might not be located at the back of the
mobile device. Check the location of the NFC tag on your mobile device
before tagging.
• While cloning, the machine is locked.
6
Select the settings you want to apply and press OK.
7
Follow the instruction on the mobile device’s screen.
Importing (Applying the settings to the machine)
1
Check that NFC and Wi-Fi Direct features are enabled on your mobile
device and Wi-Fi Direct feature is enabled on your printer (see "Setting
the Wi-Fi Direct for mobile printing" on page 152).
2
Open Samsung Mobile Print Manager from your mobile device.
If you do not have Samsung Mobile Print Manager installed on your
cellphone, go to the application store (Samsung Apps, Play Store) on your
mobile device, and just search for download the app and try again.
3
Press Import.
4
Type in the ID and Password, then click OK.
If necessary, type in the ID and Password to log in. If it’s your first time
logging into the printer, type in the below default ID and password. We
recommend you to change the default password for security reasons.
• ID: admin
• Password: sec00000
If you want to create a new user or change the password, see "Security tab"
on page 214.
5
Select the settings you want to copy.
To Next Page
Loading...
