21
1. Introduction
Turning on the machine
Keep in mind that you should use the power cord supplied with the
machine. Otherwise, it can cause damage or fire to the machine.
1
Connect the machine to the electricity supply first.
Turn the switch on if the machine has a power switch.
2
Turn the switch on.
If you want to turn the power off, press the (Power/Wake Up) button.
• Some parts inside of the machine may be hot when power is on, or after
printing. Be careful not to burn yourself when working inside the
machine.
• Do not disassemble the machine when it is turned on or plugged in.
Doing so may give you an electric shock.
• If you turn the machine off directly using the power switch, it could cause
the hard disk problem in the machine.
To Next Page
Loading...
