Samsung ProXpress M453x series - SPDS Device Connection Methods

4.Troubleshooting
4.8.1.5.SelectConnectMethod
WIFI-Direct
1)DeviceConnectMethod
•Press‘Wi-FiDirect’.If‘Wi-Fi’isdisabled‘Wi-Fi’willbeturnonautomatically.
2)SelectDevice
•AftersearchingPeeryoucanseeprinterlistthatisavailable.
•Selectprinterforconnectivity.
3)DeviceConnect
•PressWPSorConnectbuttonofprinterforconnectivity.
•OnceSPDShasconnectedyoucanseeUserInformationConsentScreen.
4)FailDeviceConnect
•WhenyourprinterrmwareisnotsupportedbySPDSatemporarydeviceerrorpop-upmessagewilloccur.
Copyright©1995-2017SAMSUNG.Allrightsreserved.4-124