116
5. Scan & Send(Scanning)
Basic scan
This is the usual procedure to scan your original documents.
1
Tap Scan & Send from the home screen or Apps.
2
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 45).
3
Adjust the settings in the Send tab and More tab.
4
Select a destination using (Add Destination), + Me, (Address
book), Email , SMB, FTP, Box, or USB).
You can send scanned documents to Email, Fax, FTP, or SMB addresses
through the (Address book). The Email, Fax, FTP, or SMB icons appear
next to the contact's name in the Address book. When you select a name,
the first icon is selected by default. To send documents to multiple
destinations, select the icons for each of the destinations.
5
Tap , (Start) from the control panel to begin scan.
To cancel the current send job, tap (Stop), then tap Job Status on the
control panel, and then delete the job you want (see "Job Status" on page
34).
To Next Page
Loading...
