310
3. Network Setup
Set protocols
You can enable/disable the protocols (Standard TCP/IP, LPR, IPP, ThinPrint,
CIFS, SNTP (Simple Network Time Protocol), SLP (Service Location Protocol),
Telnet, SNMP V1/V2 (Simple Network Management Protocol), SNMPv3,
UPnP(SSDP) Protocol, and mDNS (Multicast Domain Name System), SetIP, and
HTTP).
Tap Settings > Network Settings > Network Protocol from the home screen
or Apps.
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine (see "Settings tab" on page 162).
To Next Page
Loading...
