Understanding the copy screen
98
4. Copying
You can select the Original and Output binding type, either type is Book or
Calendar.
• 1 Sided: For originals or output binding type that are printed on one side
only.
• 2 Sided, Book: For originals or output binding type that are printed on both
sides.
• 2 Sided, Calendar : For originals or output binding type that are printed on
both sides, but the back is rotated 180 degrees.
Reduce/Enlarge
The reduce/enlarge feature allows you print an image larger or smaller than the
original. Tap the icons on the screen to reduce a copy by 25 % to 99 %, or enlarge
a copy by 101 % to 400 %.
•100% (Original): Prints the copy at the same size as the original.
• Auto: Reduces or enlarges the copy based on the size of the output paper.
• Custom: You can set custom percentage(between25 to 400%).
• XY Custom: You can set XY custom values(between 25 to 400%).
• Other preset values: Reduces or enlarges the copy to a preset value. The
icons on the right side of the column indicate the presets to use when
copying to a different paper size.
Finishing
You can set the print output options.
Sets the machine to sort the copy job. For example, if you make 2 copies of a 3
page original, one complete 3 page document will print followed by a second
complete document.
• Collated: Prints output in sets to match the sequence of originals.
• Uncollated: Prints output sorted into stacks of individual pages.
Original Size
Use this option to set the actual paper size of the originals.
• Mixed Size: If the original uses a combination of both Letter and Legal-size
paper, the machine can use the proper-sized paper for each sheet from
multiple trays. For example, if the original is 3 pages, two Letter and one
Legal, the machine prints in order on the correct paper size for each page.
• Custom size: If you need to set a custom value for a special size of paper,
use the arrows to set the required size.
To Next Page
Loading...
