240
6. Useful Setting Menus
Network
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 26).
To change the menu options:
• Press (Menu) > Network on the control panel.
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine. When SyncThru™ Web Service opens, click Settings >
Network Settings (see "Using SyncThru™ Web Service" on page 192).
Option Description
TCP/IP (IPv4)
Selects the appropriate protocol and configure parameters
to use the network environment (see "Setting IP address" on
page 130).
There are lots of parameters to be set. If you are not
sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment through
IPv6 (see "IPv6 configuration" on page 140).
Ethernet
Configure the ethernet port and network transmission
speed.
Turn the power off and on after you change this
option.
802.1x
You can select the user authentication for network
communication. For detailed information consult the
network administrator.
Wi-Fi
a
Select this option to use the wireless network (see "Wireless
network setup(Optional)" on page 142).
Protocol
Management
You can activate or deactivate the protocols.
Turn the power off and on after you change this
option.
Network
Configuration
This list shows information on your machine’s network
connection and configuration (see "Printing a network
configuration report" on page 130).
Clear Settings
Reverts the network settings to the default values.
Turn the power off and on.
a. This option is available when the optional Wireless/NFC kit installed.
Option Description
To Next Page
Loading...
