Samsung ProXpress SL-M4030ND - Page 29

Menu overview
29
2. Menu Overview and Basic Setup
Network
(see "Network" on page 240)
Direct USB
(see "Direct USB" on page 241)
Job Management
a
(see "Job Management" on page 242)
a. This option is available when the optional memory installed or RAM Disk is checked. To use Ram disk, click Samsung Printer Center > Device Options and then check RAM Disk (see "Using
Samsung Printer Center" on page 196).
Admin Setup
b
(see "Admin Setup" on page 243)
b. You need to enter the password to access this menu. The default password is sec00000.
TCP/IP (IPv4)
DHCP
BOOTP
Static
TCP/IP (IPv6)
IPv6 Protocol
DHCPv6 Config
Ethernet
Ethernet Port
Ethernet Speed
802.1x
Wi-Fi
c
Wi-Fi On/Off
Wi-Fi Settings
WPS
Wi-Fi Direct
Wi-Fi Signal
CLR Wi-Fi set.
c. This option is available when the optional Wireless/NFC kit installed.
Protocol Management
NFC
c
Network Configuration
Clear Settings
Print From
File Manage
Show Space
Active Job
Secured Job
Stored Job
Stamp
Stamp Activate
Item
Text Size
Opacity
Position
Change Admin Password
Firmware Upgrade
Import Setting
Export Setting
Secure Print
d
Supplies Management
Toner Low Alert
d. This option is available when the System Setup > Maintenance > RAM Disk is enabled.