Media and tray
38
2. Menu Overview and Basic Setup
1
Press the push-release of multi-purpose tray and it down to open. Unfold
the multi-purpose tray extension, as shown.
2
Load the paper.
3
Squeeze the Multi-purpose tray paper width guides and adjust them to
the width of the paper. Do not force them too much, or the paper will
bent resulting in a paper jam or skew.
• When printing the special media, you must follow the loading guideline
(See "Printing on special media" on page 39).
• When papers overlap when printing using Multi-purpose tray, open tray
1 and remove overlapping papers then try printing again.
4
When you print a document, set the paper type and size for the Multi-
purpose tray (see "Setting the paper size and type" on page 42).
1
2
To Next Page
Loading...
