Understanding display messages
96
4. Troubleshooting
Error [error number]
Not connected from the wireless AP.
If you do not reconnect
automatically, check the wireless
settings
The machine failed to connect to the wireless
AP(access point or wireless router).
Check the status of the access point, including its configuration and power
connections, as well as any devices that may affect wireless communication.
If the problem persists, please call for service.
Error [error number]
Failed connection to WPS. Try again
or set up other wireless connection
The machine failed to connect via WPS. Check the WPS settings (see "Using the WPS menu" on page 143).
Error [error number]
Wi-Fi Direct is not ready. Turn off then
on. Call for service if the problem
persists
The machine failed to initialize the Wi-Fi Direct
connection.
Turn the Wi-Fi Direct feature off and then back on or reboot the machine or
mobile device. If the problem persists, please call for service.
Error [error number]
Failed to connect to Wi-Fi Direct. Turn
off your mobile device and turn it on
The machine failed to connect via Wi-Fi Direct. Turn the machine off and back on again. If the problem persists, call for
service.
IP Conflict The IP address is used elsewhere. Check the IP address or obtain a new IP address.
802.1x Network Error
Fail to authenticate. Check the network authentication protocol. If the problem persists, contact
your network administrator.
Message Meaning Suggested solutions
To Next Page
Loading...
