27
ENG
Your television has several settings which allow you to control
picture quality.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the † or … button to select Picture.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
4 Select the required option (Custom, Colour Tone) pressing
the
† or … button.
5 Press the † or … button to select Custom.
Press the
ENTER () button.
Result
:
The
Custom
menu is displayed.
6 Press the ENTER () button to change the setting.
The options are displayed in the following order.
◆ Custom : Contrast, Brightness, Sharpness, Colour,
Tint(NTSC ONLY)
➢
Custom Options available in PC, DVI Mode: Contrast,
Brightness, Sharpness.
➢
The horizontal bar is displayed. Move the horizontal bar’s
cursor left or right by pressing the
œ or √ button.
➢
When the picture mode is set to Custom, the settings values
may vary depending on the input source.
(ex. RF, Video, Component, PC or DVI)
➢
If you make any changes to these settings, the picture
standard is automatically switched to the
Custom.
◆ Colour Tone : Cool 2, Cool 1, Normal, Warm 1, Warm 2.
7 When you are satisfied with the settings, press the EXIT/TV ()
button to return to normal viewing.
➢
If you make any changes to these settings, the picture
standard is automatically switched to the
Custom.
Adjusting the Picture Settings
Custom
TV
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Contrast 100
Mode : Dynamic
√√
Custom
√√
Colour Tone : Normal
√√
Colour Control
√√
Film Mode : Off
√√
Size : 16 : 9
√√
PIP
√√
†
More
Picture
Move Enter Return
TV
Move Enter Return
Mode : Dynamic
Custom
Colour Tone : Normal
Colour Control
Film Mode : Off
Size : 16 : 9
PIP
†
More
Picture
Move Enter Return
TV
Cool 2
Cool 1
Normal
Warm 1
Warm 2
BN68-00742A-00Eng_0621 2004.6.21 3:51 PM Page 27
To Next Page
Loading...
