6-3. Connector Functions
Connector Functions
CN101 DVI-I (Analog/ Digital) signal input terminal
* Upon occurrence of a fault: No RGB Output error may occur.
CN201 Connects to the power Function board.
* Upon occurrence of a fault: Either a No LED screen error may occur or the light sensor may
not function.
CN400 Transfers LVDS signals from the main board to the panel.
* Upon occurrence of a fault: Blank Screen and No Power errors may occur.
CN600 Sends PWM outputs from the power board to the inverter.
* Upon occurrence of a fault: Blank Screen error may occur.
CN700 HDMI sound output terminal
* Upon occurrence of a fault: An error may occur in I2S digital sound outputs inputted to the
HDMI.
CN102 HDMI signal input terminal
* Upon occurrence of a fault: No Digital Output (No TMDS output) error may occur.
CN601 Supplies 12V from the adapter to the main board.
* Upon occurrence of a fault: No Power and Blank Screen errors may occur.
6-4. Cables
Use LVDS 30p FFC cable
Code
BN96-12447L
Photo
To Next Page
Loading...
