• The maximum leveling angle is
1-2
degrees.
If
leveling more than
the
maximum is
required, re-install
the
wall
mount
bracket.
• Make sure
to
confirm
that
the
hook on
the
wall
mount
has been inserted
all
the
way in.
If
it
is
not
inserted
all
the
way in,
the
TV
may
fall
off
the
wall.
• When removing the
TV
from the
wall
mount,
first
remove the cables
to
ensure
the
protection
of
the cables.
•
Do
not penetrate the wall
to
install inside.
The
TV
may become overheated and malfunction.
• When removing
the
TV
from
the
wall, make sure 2 people
lift
it
up together.
Do
not
apply
direct force on
the
display.
If
the
TV
size is 82"
or
larger, ensure
that
at
least three persons
work
together.
•
Be
sure
that
the
TV
and
wall
mount
stand are
not
hit
with
excessive force
after
installing
the
wall
mount. The
wall
mount
or
TV
may be damaged
or
the
TV
connection
with
the
wall
mount
device may become unstable. In
this
case,
reinstall
the
wall
mount
or
consult an
expert
for
assistance.
•
To
maintain product performance and prevent malfunctions, do
not
install in
the
following
locations.
- Places where there is a risk
of
vibration
or
shock: The product may
fall
and
be
damaged.
- Next
to
a sprinkler sensor: The sensor may detect
the
heat
from
the
TV
and sprinklers
may start.
- Near high-pressure cables: The
TV
may
get
interfered by high-pressure cable and
the
screen may
not
display correctly.
- Near heaters: The
TV
may become overheated and malfunction.
-
Do
not
install anywhere
other
than
a vertical wall.
- Children may swallow a component
or
cause damage
to
the
TV.
Ensure
that
it
is
kept
out
of
reach
of
children.
-
Do
not
penetrate
the
wall
to
install inside. The
TV
may become overheated and
malfunction.
- English 3 -
ITI
::::,
10
-
ui'
;;;J"'
To Next Page
Loading...
