Setting Option Bytes
Enter Factory Mode with 1. Service Remote (only).
Check Option Byte Table located on 2. GSPN (Fast Track or Tips).
Select 3. Option.
Select each item to change. 4.
Can Use new 5. Writing Type to enter model (if entered wrong it will not change.)
6.
Performing Factory Reset
Enter Factory Mode.1.
Select 2. Option £ Factory Reset
3.
Perform ALL TV Settings. (New out of box condition)4.
First Screen Appearing in Factory Mode
Sample :
Micom Version 9
Wired MAC Success 9
Model 9
T-CON 9
Dimming 9
FRC 9
Sub Micom 9
Tizen Platform info 9
BT Version 9
E-Manual 9
Blaster Version 9
E-Pop Version 9
EDID Success (Status) 9
HDCP Success (Status) 9
Wireless MAC Success 9
WiFi Version 9
Factory Data Version 9
EERC Version 9
Date of Purchase - 9
Initial set up date
(Resets with Factory
Reset)
CO Status ("O" Operational) 9
Testing Items 9
To Next Page
Loading...
