English - 6
Reversing the door
NOTE
For the models with handles, reverse the handles rst. (For detailed information, see the
“Reversing the door handle position (For models with bar handles)” section.)
1. Remove the Cover Wire Door (1).
Disassemble the Cap space Door (2).
2. Remove the Cover Hinge to push a hook
‐ Insert a at-head screwdriver and put it back
‐ Lever up the cover and push a hook (Take
care not to damage the Cover Hinge Wire by
pushing by pushing it too hard)
‐ Disassemble it by pushing
3. Disconnect the wiring connector for the fridge
door.
‐ This step may not apply to some models.
CAUTION
Do not pull the connectors too hard.
4. Remove the screws.
‐ (Be careful not to drop the door when you
disassemble it.)
To Next Page
Loading...
