English30
Setting up your Refrigerator
Setting up your Refrigerator
Spacer
<Back>
Spacer
NOTE
Remove paper on spacer and then attach
a spacer (Gray block) on the back side of
refrigerator for better performance. Make
sure a spacer x like above image when
you install the refrigerator. It is improving
the refrigerator performance. If You set the
refrigerator in furniture, the spacer should
be removed for the door-ushing with
furniture.
Flooring
For proper installation, this refrigerator
must be placed on a level surface of hard
material that has the same height as the
rest of the ooring. This surface should be
strong enough to support a fully loaded
refrigerator. To protect the oor nish, cut
a large section of the cardboard carton and
place it under the refrigerator where you
are working.
NOTE
Pulling or pushing the refrigerator may
damage the oor. Moving the refrigerator
after installation may damage the oor.
RB7000J_DA68-03846A-01_EN.indd 30 2019-04-16 AM 11:54:24
To Next Page
Loading...
