English32
Setting up your Refrigerator
Setting up your Refrigerator
1. Place the refrigerator in an appropriate
location with reasonable clearance
between the wall and the refrigerator.
Refer to installation instructions in this
manual.
2. Before using the refrigerator please
remove the shelf corner covers shown
on below gure. (The Foam-PE are
used to secure your refrigerator during
transportation).
3. Once the refrigerator is plugged in,
make sure the interior light comes on
when you open the doors.
4. Set the temperature control to the
coldest temperature and wait for an
hour. The freezer should get slightly
chilled and the motor should run
smoothly.
5. After powering the refrigerator, it
will take a few hours to reach the
appropriate temperature.
6. Once the refrigerator temperature is
sufciently cool, you can store food and
drink in the refrigerator.
NOTE
After powering the refrigerator, the alarm
will sound. Press Freezer or Fridge button.
RB7000J_DA68-03846A-01_EN.indd 32 2019-04-16 AM 11:54:25
To Next Page
Loading...
