English54
Reversing the door (optional)
Reversing the door (optional)
12. Switch the position of Bottom hinge and
Leg (Right > Left). Assembly the Hinge
Low after putting the Freezer Door in
the middle hinge.
NOTE
• Disassemble the Guide auto close and
the Shaft-hinge (1).
• Assemble the Shaft-hinge and the the
Guide auto close like this Picture.
• Make sure that the screws are screwed
tight.
13. Put the Cap-Control out from the Cover
Control like the picture.
RB7000J_DA68-03846A-01_EN.indd 54 2019-04-16 AM 11:54:37
To Next Page
Loading...
