Installation
English32
Installation
NOTE
The measurements in the table may differ, depending on the measuring method.
STEP 2 Spacing (applicable models only)
NOTE
The number of provided spacers varies on the model. Attach all the provided spacers.
1. Open the door and locate the provided
spacer (Gray block).
2. Unpack the spacer and attach it to the
rear of the refrigerator as shown. They
help ventilate air to the rear wall and
save power consumption.
STEP 3 Flooring
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the oor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its nal
position, do not move it unless
necessary to protect the oor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
Untitled-6 32 2023-12-27 5:37:05
To Next Page
Loading...
