3D. GPS Navigation 171
GPS Navigation
● Help Card: allows you to configure the settings
for the onscreen help message (card).
Options include:
Always On or Always Off.
● Exit after (minutes): turns the application off
after there has been no activity for 20 minutes.
● Map Colors: allows you to configure the
appearance of the onscreen map. Options
include:
Auto, Daytime, or Nighttime.
● Init Volume: allows you to assign the initial
default volume level for the audio readout.
Options include:
Normal, Very Soft, Soft, Loud,
and
Very Loud.
䡲 Navigation: allows you to configure navigation-
related parameters such as:
● Route Style: allows you to choose the method
which is used to provide you directions from
Point A to Point B. The default is
Fastest route.
Choose from one of the following options:
Fastest, Shortest, Prefer Streets, Prefer
Highway, Pedestrian, or Ask me each trip.
● Avoid: allows you to specify those in-route
obstacles that should be avoided during
configuration of the best route. Options
include:
HOV Lanes, Tolls, and Traffic Delays.
● Moving Maps: allows you to select the default
map type displayed for your navigation:
3D
Moving Maps or 2D Moving Maps.
● Backlight: allows you to configure the
Backlight setting between
On, Off, or On at
Turns.
● Traffic Alerts: allows you to either enable (On)
or disable (
Off) real-time traffic alerts along
your current route.
䡲 Navigation Audio: allows you to choose whether
the street names are announced during your
navigation.
● Settings: allows you to configure the level of
audio detail given for directions. Options
include:
Full Audio, Instructions Only, or No
Audio.
● Guide Tone: allows you to configure a voice
type of the audio readout. Options include
Sara(English) or Maria(Spanish).
M570.book Page 171 Thursday, June 10, 2010 12:00 PM
To Next Page
Loading...
