English - 21
SETTING UP
DISASSEMBLE THE FLEX
DOOR
1. Take out the upper drawer by lifting it up.
2. Take out the lower basket ( 1 ) by lifting the
basket up from the rail system.
1
3. Press the fi xing hook of rail system.
4. After holding and pulling out the top of Freezer
Door, remove it at the rail system.
Be careful not to scratch or dent the
Sliding rail by letting it strike the fl oor.
Make sure that you mount the freezer
basket in the right position when removing
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
Do not overload the bottom basket or
the top drawer. Overloading prevents the
Freezer drawer from closing properly and
will eventually cause frost build-up.
CAUTION
CAUTION
DA68-02601F-00.indb 21DA68-02601F-00.indb 21 2014. 9. 16. 9:052014. 9. 16. 9:05
To Next Page
Loading...
