English
Hinge Low
CAUTION
• Must working more than 2 people.
• Be sure to unplug the power cord before performing the operation above.
Hinge low
Hinge
low
1. Disconnect the Power Cord.
2. Lay down the set.
CAUTION
• Must working more than 2 people.
• Be sure to unplug the power cord before
performing the operation above.
3. Remove Bolt (2 ea). (Using spanner or
10 mm Box wrench.)
4. Remove Hinge Low R/L.
5. Reassemble in the opposite order of
disassembly after replacing the top,
middle, and/or bottom hinge.
CAUTION
• Make sure the wire connectors are
connected properly.
• Be careful not to damage the wires when
fastening the top cover.
FDR_RF8000MC_User-servicing-manual_26ge.indb 8 2020-12-11 오후 2:38:03
To Next Page
Loading...
