Power Freeze Button
Press the Power Freeze button (
2
) if you want products to freeze more quickly in the freeze.
The icon (
) lights up and the inside temperature of the freeze. decreases for about two and a half hours.
To turn off Power Freeze before the 2 1/2 hours are up, just press the button again to cancel the Power
Freezer mode.
If you select the Power Freeze mode, you may hear a little of noise because of the continuous
operation of the compressor.
Power Cool Button
Press the Power Cool button (
5
) if you want products to cool more quickly in the Fridge. The icon
(
) lights up and the inside temperature of the Fridge decreases for about two and a half hours. To turn off
Power Cool before the 2 1/2 hours are up, just press the button again to cancel the Power Cool mode.
If you select the Power Cool mode, you may hear a little of noise because of the continuous
operation of compressor.
Freezer Button
Press the Freezer button (
3
) repeatedly until the desired temperature is shown in the display (
A
).
Whenever you press the button, the temperature will move 2°F degrees with each push. You can set the
temperature between 8°F and -8°F. Five seconds after the new temperature is set, the display will again
show the actual current freezer temperature until a new temperature is selected.
-2°F is recommended.
USING THE CONTROL PANEL & DISPLAY
To Next Page
Loading...
