How to calibrate the touch point.
This function can be used to calibrate the stylus pen touch point to improve usability with the Touch screen.
1. Choose the [Touch Screen Correction] button, and
then a screen will appear with pointer instructions
on the top.
2. Press down lightly on the center of the “+” mark.
Repeat as the “+” mark moves on the screen.
During the calibration, when you do not pinpoint the “+” mark, it will keep showing up on the screen.
▶ To keep the current setting, wait for 30 seconds.
3. To save the new calibration data, touch the LCD screen within 30 seconds.
How to change the Current Data/Time.
1. Choose the [Current Data/Time] button. 2. Choose the desired date and time.
3. To apply your new settings, press [OK] button.
To Next Page
Loading...
