Reattaching the Freezer Door
1) Insert the lower hinge (qb)in the bracket lower
hinge (@).
2) Reattach the freezer door by inserting the ho._
(®) in the lower side of the door into the hole iv
the lower hinge (®) and pulling the hose down
dP
Y
-@
3) Insert the upper hinge shaft (®) into the hole (®). After levelling between the upper hinge hole (@)anc
the hole of the cabinet (®). Reattach hinge screws (®) and gound screw (®) in a clockwise direction.
4) Connect the wires. 5) Put the front part of the upper hinge cover ((_)
the front part of the upper hinge (_) and reatta
from the front part of the upper hinge cover firs
21
To Next Page
Loading...
