L...._9- AboutLevelingfirsE
NOTE
Making small adjustments between doors.
Ifthe door of the freezer is lowerthan that of the
refrigerator.
Adjustment part
Please open the doors and adjust then as follows:
Ifthe door of freezer is higherthan that ofthe
refrigerator.
!]
1) Releasethe nut (d)) onthe lower hinge until it reachesthe upper end ofthe bolt (@).
\djustment part
@
NOTE
when you release the nut(C), use enclosed heX wrench (@)to turn the bolt(@)in a slightly
counterclockwise direction. This will enable you to turn the nut(@) loose with your fingers.
d, NUT
,'_;,NUT ,'2',BOLT (2,BOLT
2) Pleaseadjustthe height differencebetweenthe doors by turningthe bolt (@)clockwise( _ ) or counter
clockwise( _ ).
@ when you turn cl0ckwise (-,_,,._)i the d0orgoes upl
NOTE
,;, WRENCH
,_ WRENCH
(_2XlBOLT (_2XlBOLT
J
3) After adjusting the doors, the nut ((_)turn clockwise ( "_J ) until it reaches the lower end of the bolt, then
tightenthe bolt again with the wrench (®)to fix the nut(@).
f
,;, WRENCH ,_ WRENCH
..... _ii_ii/iii_i_!i!i_iiiii. ,
::.
,'_:,NUT
\ (2:,BOLT
NOTE
d;, NUT
12:,BOLT
i
If y0Udo not fix the nut (@)firmly, the bolt (@)maybe releaSed.
25
To Next Page
Loading...
