Samsung RS552NRUA Series - Removing and Installing the Fridge Door

REMOVINGTHEREFRIGERA
TORDOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
RemovingandInstallingtheFridgedoor
A few things to mention first.
•
Make sure that you lift the door straight up so the hinges are not bent or broken.
•
Be careful not to pinch the wire harness on the door.
•
Place doors on a pr
otected surface to pr
event scratching or damage.
1. Remove the upper hinge cover
1
using a screwdriver, and then disconnect the wires by gently
pulling them apart
2
.
2. Remove hinge screws
3
and the ground screw
4
by turning counter-anticlockwise, and take
off the upper hinge
5
. Be car
eful that the door does not fall on you as you ar
e r
emoving it.
3. Remove the door fr
om the lower hinge
6
by carefully lifting the door straight up
7
.
4. After the refrigerator is placed to the specified position, install the fridge door in the reverse
order as follows:
2
1
3
4
5
7
6
16_settingup