6_safety information
safety information
damaged by the back of the refrigerator.
• Do not bend the power cord excessively or place heavy
articles on it.
- This constitutes a fire hazard.
• Do not use a loose socket or a cord that shows cracks or
abrasion damage along its length or at either end.
• If the power cord is damaged, have it replaced immediately
by the manufacturer or its service agent.
• When moving the refrigerator, be careful not to roll over or
damage the power cord.
• Do not insert the power plug with wet hands.
• Disconnect the power before cleaning or maintaining your
refrigerator.
- Do not use a wet or damp cloth when cleaning the pulug.
• Remove any foreign matter or dust from the power plug
pins.
- Otherwise there is a risk of fire.
• If the refrigerator is disconnected from the power supply,
you should wait for at least ten minutes before plugging it
back.
• If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock or fire.
• The appliance must be positioned so that the plug is
accessible after installation.
• Do use separate and reliable earthing power. Don’t share a
socket with other appliances. In order to ensure safety, the
socket and its connecting wire must be able to bear over
10A current.
To Next Page
Loading...
