Samsung RS554NRUA Series - Door Removal and Installation

REMOVINGTHEREFRIGERATORDOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
RemovingandInstallingtheFreezerdoor
A few things to mention first.
•
Make sure that you lift the door straight up so the hinges are not bent or broken.
•
Be careful not to pinch the wire harness on the door.
•
Place doors on a protected surface to prevent scratching or damage.
1. Remove the upper hinge cover
1
using a screwdriver, and then disconnect the wires by
gently pulling them apart
2
.
2. Remove hinge scr
ews
3
and the ground screw
4
by turning counter-anticlockwise,
and take off the upper hinge
5
. Be careful that the door does not fall on you as you are
removing it.
3. Remove the door fr
om the lower hinge
6
by carefully lifting the door straight up
7
.
4. After the refrigerator is placed to the specified position, install the freezer door in the reverse
order as follows:
.
setting up your side-by-side
refrigerator
3
4
5
7
6
2
settingup_15
01 SETTING UP