setting up _07
01 SETTING UP
PRECAUTIONS BEFORE
INSTALLATION
Make sure to check before installation.
Select an installation place
Please check the followings before install the •
product. Check if the product can clear the
doors on its way to the installation position.
If the product is not able to clear the doors, it is -
not possible to install.
(mm)
Model A B C D E ETC
RS627LHQESR 1067
706 2083
2340
2182
42”
RS757LHQESR 1219 2413 48”
(mm)
Model A B C D E F
RS627LHQESR 1080 1230 997 330 436 1103
RS757LHQESR 1129 1333 1032 365 510 1176
Allow suffi cient space to the •
right, left, back and top for
air circulation.
If there is not enough space, -
it is not possible to install.
The following accessories •
are included with your
refrigerator:
(mm)
Model A B C ETC
RS627LHQESR 1068
700
2120Min
2140Max
42”
RS757LHQESR 1220 48”
Check if the fl oor is fl at.•
If the refrigerator is installed on an -
uneven fl oor, it will cause vibration
and noise.
Check if the fl oor can support the •
weight of the refrigerator and the
food inside (500Kg total).
It could damage the refrigerator. -
Check if the product is placed •
within the reach of a wall outlet.
When the product is a dispenser •
model, check if it is within easy
access of water supply and the
humidity is low.
Please select a place with easy access to water -
supply for the the water & ice dispenser.
Avoid a place with high heat •
or extremely cold.
Install the product with an -
ambient temperature between
5ºC and 43ºC.
When it is installed in a -
place with an extremely cold or hot ambient
temperature, the product could mal-function
and its cooling capacity will decrease resulting
in an increase in power consumption.
Setting up your side-by-side
refrigerator
Door 90º Open
Door 130º Open
Location of
Electrical
Receptacle
Water Supply
Opening (20x20)
DA68-01312H(0.0).indb 07DA68-01312H(0.0).indb 07 2012.2.16 5:2:22 PM2012.2.16 5:2:22 PM
To Next Page
Loading...
