Samsung RS64R55 Series - Page 9

English - 8
Bottom Hinge
[Disassembly]
1. Disconnect the Power Cord.
2. Lay down the set.
CAUTION
• Must working more than 2 people.
• Be sure to unplug the power cord
beforeperforming the operation
above.
[Disassembly]
1. Disconnect Hose.
(Only Hinge Low Left)
2. Exhaust water in Hose.
(Only Hinge Low Left)
3. Remove Bolt(3ea).
(Using spanner or 10mm Box wrench)
4. Remove Hinge Low R/L.
[Assembly]
1. Assemble hinge low on bottom.
(Using spanner or 10mm Box wrench)
2. Connect Hose (Only Hinge Low Left)
3. Assemble water in Hose.
(Only Hinge Low Left)
CAUTION
• Be sure to unplug the power cord
before performing the operation
above.
pull the guide and hose
Push the guide and hose
Hinge lowHinge low
Hinge lowHinge low
Hinge replacement