Samsung RS6GA Series User Manual (English)

Other manuals for Samsung RS6GA Series

User Manual76 pages

User Servicing Manual260 pages

Questions and Answers:

R
reyesjasonAug 20, 2025
Why is my Samsung RS6GA not cooling?
- J
  Joseph MullinsAug 20, 2025
  If your Samsung Refrigerator's fridge or freezer isn't operating or the temperature is too warm, ensure the power cord is properly plugged in. Also, check the temperature control and set it lower if needed. Keep the refrigerator away from heat sources and direct sunlight, and ensure there's enough clearance (more than 50 mm) between the refrigerator and nearby walls or cabinets. Avoid overloading the refrigerator and ensure food isn't blocking the vents.
M
Mckenzie ElliottAug 22, 2025
Why is my Samsung RS6GA ice maker not working?
- M
  mary08Aug 22, 2025
  If your Samsung Refrigerator's ice maker isn't producing ice, first ensure that it hasn't just been installed, as it can take 12 hours to start making ice. Check that the freezer temperature is set below -18 °C (0 °F), or -20 °C (-4 °F) in warm ambient air. Also, verify that the dispenser panel Lock is deactivated and that the ice maker is turned on.
A
Aaron HoffmanAug 25, 2025
Why is my Samsung Refrigerator not dispensing water?
- M
  mosleyamyAug 25, 2025
  If your Samsung Refrigerator is not dispensing water, check if the water line is correctly connected and the water supply is turned on. Also, ensure that the dispenser panel Lock is deactivated. If you've installed a third-party water filter, replace it with a Samsung-provided or approved filter to prevent leaks and potential damage.
C
Colleen FloresAug 26, 2025
What to do if ice is not dispensing from Samsung Refrigerator?
- J
  John AndersonAug 26, 2025
  If ice is not dispensing from your Samsung Refrigerator, it may be jammed if the dispenser hasn't been used for about 3 weeks. Empty the ice bucket and turn off the ice maker if you won't be using it for a while. Make sure the ice bucket is properly inserted. Also, check that the water line is correctly installed and the water supply is on.
G
ghickmanAug 28, 2025
What to do if my Samsung Refrigerator is not dispensing ice?
- M
  martinzacharyAug 28, 2025
  If your Samsung Refrigerator is not dispensing ice, it could be due to several reasons. If the ice dispenser hasn't been used in about 3 weeks, ice may have jammed; if you anticipate not using it for a while, empty the ice bucket and turn off the ice maker. Ensure the ice bucket is correctly inserted. Also, verify that the water line is properly connected and the water supply is on. If you won't be using the refrigerator for a long time, empty the ice bucket and turn off the ice maker. Make sure the ice bucket is properly inserted. Check if the water line is installed correctly. Check if the water line stop cock is closed.
R
Robert MartinezAug 30, 2025
How to get rid of odors in my Samsung RS6GA?
- F
  Frank HendersonAug 30, 2025
  If your Samsung Refrigerator has odors, clean it thoroughly and remove any spoiled food. Also, ensure that foods with strong odors are wrapped airtight.
Z
zvelasquezAug 31, 2025
Why is the water flow weak in my Samsung RS6GA Refrigerator?
- C
  Charles McphersonAug 31, 2025
  If water flow in your Samsung Refrigerator is weaker than normal, the water pressure might be too low. Make sure the water pressure is between 30 to 125 psi.
A
April ObrienSep 2, 2025
Why is there frost around the vents in my Samsung Refrigerator?
- P
  pstoneSep 2, 2025
  If you notice frost around the vents in your Samsung Refrigerator, it might be because food is blocking them. Ensure that no food is obstructing the vents.
J
Joseph SandersSep 4, 2025
What to do if my Samsung RS6GA is over-cooling?
- J
  Jeffrey LopezSep 4, 2025
  If your Samsung Refrigerator is over-cooling, the temperature control may be set incorrectly. Try adjusting the temperature to a higher setting.
M
Martin OlsonSep 6, 2025
What to do if my Samsung Refrigerator is too cold?
- P
  Phillip MartinSep 6, 2025
  If your Samsung Refrigerator is over-cooling, the temperature control might not be set correctly. Adjust the temperature to a higher setting. Set the temperature higher.