Accessories
Filter Water Assy install Filter
Button
❶
POWER FREEZE
BUTTON
Speeds up the time needed to freeze products in the freezer. This can
be helpful if you need to quickly freeze items that spoil easily or if the
temperature in the freezer has warmed dramatically (For example, if the door
was left open).
❷
FREEZER BUTTON Press the FREEZER button to set the freezer to your desired temperature.
You can set the temperature between -14°C and -25ºC.
❸
ICE OFF BUTTON Press the ICE OFF button to turn the ice making function off.
When Ice Off blinks on the display panel, reinsert the bucket and/or make
sure it’s installed properly.
When you change the filter, press and hold this button for 3 seconds to
reset the filter schedule.
❹
LIGHTING BUTTON Press the LIGHTING button for the dispenser LED lamp to stay on.
❺
FRIDGE BUTTON Press the FRIDGE button to set the fridge to your desired temperature.
You can set temperature between 1°C ~ 7°C and Power cool.
Power cool will be on the display after 1°C
❻
CHILD LOCK
BUTTON
By pressing this button, all buttons will be locked. The Ice Type
button and the dispenser pad will not work either.
To cancel this function, press this button again.
If you are going on vacation or business trip or you do not need to use the
refrigerator, press and hold this button for 3 seconds. The temperature in the
fridge will be around 15°C and the freezer will work normally.
❼
ICE TYPE BUTTON Press the ICE TYPE button to choose cubed or crushed ice.
➑
WATER BUTTON Press the WATER button for water.
➍
➎
➏
➋
➌
➊
➑
➐
To Next Page
Loading...
