33
DISASSEMBLY & REASSEMBLY
PART NAME DESCRIPTION FIGURE
Ice Max Type
1. Take out the tray cube by pulling it.
2. Take out the Tray-Ice maker by pulling it.
3. Take out the Support -Ice maker by pulling it.
PART NAME DESCRIPTION FIGURE
Ice Max Type
1. When assembling, put the Support tray ice in
upper and right side of slots.
2. Grasp the bottom center and push the
Support try ice until it snapes into place.
3-13. Disassembling the Freezer Compartments (Ice Max Type)
3-13-1. Assembling the Freezer Compartments(Ice Max Type)
To Next Page
Loading...
