18
S32F351FU*
P0=115.0 mm
75.0 mm
P1=115.0 mm
75.0 mm
Refer to the area in the image
―
The dimensions of this model required by VESA are 75.0 x 75.0 mm. Please purchase the wall-mount tailored to the dimensions of 75.0 x 75.0 mm.
―
If you use a wall-mount used for the dimensions of both 100.0 x 100.0 mm and 75.0 x 75.0 mm, please ensure that its external dimensions are less than 115.0 x 115.0 mm.
―
Some wall-mounts with special shapes and with their dimensions being greater than 115.0 x 115.0 mm may be unusable.
Stand Hinge Part
If either side of the bracket to purchase P0 or P1 is longer than 115.0 mm,
the bracket will interfere with the Stand Hinge Part. If this is the case, the
wall mount should not be used.
To Next Page
Loading...
