Samsung S27CG55 Series - Adjusting the Product Tilt and Height

13
Adjusting the Product Tilt and Height
―
Height adjustment is supported on S27DG50* and S32DG50* models only.
―
The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
S27CG55* / S32CG55*
-2.0° (±2.0°) ~ 18.0° (±2.0°)
• The product tilt can be adjusted.
• Hold the lower part of the product and adjust the tilt carefully.
S27DG50* / S32DG50*
-2.0° (±2.0°) ~ 25.0° (±2.0°)
120.0 mm (±5.0 mm)
• The product tilt and height can be adjusted.
• Hold the top centre of the product and adjust the height carefully.
• When adjusting the stand height, you may hear a noise. This noise is generated because the ball
inside the stand slides when the stand height is adjusted. It is a normal noise and not a product
malfunction.
• When adjusting the left/right angles of the product, there may be a slight gap in the connection area
of the stand base. This is normal and does not indicate a malfunction of the product.