23
2nd 3rd Description
Brightness You can adjust the general brightness of the picture. (Range: 0~50)
A higher value will make the picture appear brighter.
―
This menu is not available when Eye Saver Mode is enabled.
Contrast Adjust the contrast between the objects and background. (Range: 0~50)
A higher value will increase the contrast to make the object appear clearer.
―
This menu is not available when PIP/PBP Mode is enabled.
Sharpness Make the outline of objects more clear or blurry. (Range: 0~20)
A higher value will make the outline of objects clearer.
―
This menu is not available when PIP/PBP Mode is enabled.
Color Adjust the colour saturation levels. Colour saturation intensifies as the value nears 50.
Tint (G/R) Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colours.
Contrast Enhancer Automatically balance the contrast to prevent excessive differences between bright and dark areas.
• Off / Low / High
HDR Tone Mapping Automatically adjusts the brightness with tone mapping processing according to HDR content information.
To Next Page
Loading...
